Digital audio card sound common terms Singbox technology

Audio what common terminology. Audio commonly used terms is more abstract, the commonly used terms are as follows: 1. a nerve cord: mainly refers to transporting low-level (millivolt, microvolt), small current signal cable. General Neural line for audio, video, more advanced neural line both sides of the plug is gold plated RCA plugs and wires coated anti-static protection layer. 　　

2. fever line: mainly refers to the section and shares more speaker signal transmission lines. Quality high fever line is the use of oxygen-free copper, and other materials. 　　

3. to talk on the machine: the so-called burning machine similar to the Baltimore mechanical machines, during upcoming audio equipment working after a certain period of time, the temperature inside the machine and the environment at the same temperature to amplifier State best point, at which point the playback voice is best. Spiral sound

4. an addendum: the so-called an addendum from English to Modify, amend, modify. Enthusiasts on sound system components or lines for replacement, which upgrade, call it an addendum. 　　

5. bursting: the so-called bursting refers to audio equipment during replay, when music climax is deafening. 　　

6. danji: danji refers to using making amplifier. A vacuum tube amplifier warm permeability of sound quality have so far older enthusiasts will not soon be forgotten. 　　

7. a machine: the so-called machine uses transistor fabrication of amplifiers. 　　

8. bile Stoner: is the electron tubes and transistor blend of audio equipment. The tube as before, the transistor amplifier as a post. 　　

9. Central cattle: the so-called ring ring transformer bovine refers, it and General transformer magnetic flux leakage is less than. 　　

10. a large reservoirs: large reservoir is a power filter capacitor, usually more than 10000 μ F high-capacity capacitor. 　　

11. the pretty sound: refers to audio equipment-sound quality is very good, the requirements of the achieved a high-fidelity. 　　

12. resolution: refers to audio equipment-have some transparency to "clear". 　　

13. the colouring: the so-called staining is the replay process due to the acoustic vibration makes other objects or materials appear resonance and-there is no sound. It replayed effect is harmful. 　　

14. the first-class: refers to the variety of the receiver. 　　

15. any supplements: refers to audio system with high quality components. [Edit this paragraph] speakers placed speakers should be placed? location of properly positioned box is for good playback effect, in the space must be aware of the following questions: 1. two distance between the sound box is less than the 1.5 ~ 2 m, and keep the same level. Speaker of the left and right sides and walls of the distance should be the same. The front of the speaker should not be any incidentals. 　　

2. the speaker of the treble unit and listen to ears should keep the same horizontal line, listening to and between two speakers should be 60-degree angle, listen to back to space. 　　

3. two speakers on the side of the wall in acoustics should be consistent, i.e. the walls on either side of the sound wave of reflection should be the same. 　　

4. If the speaker sound wave direction not wide, two speakers on the inner side of the display. It confuses the Elves sound 5. for small speakers if feeling low frequency is not enough, can be placed close to the corner speaker.